|
Install the
Abacus P-61 into your CFS2, FS2002 or FS2000 \aircraft
folder. If you haven't already done so, follow the instructions
on our installation page.
Press the 'S'
key twice to look at the P-61 from spot plane view. Here's a
quick walk around:
- Press 'E'
to start the engine and see the prop spin.
- Press F8 to
see the flaps slowly drop into position.
- Press the
stick forward and back to see the elevator move up and down.
- Press the
stick from side to side to see the rudder and ailerons move.
- After you
take off, press 'G' to see the landing gears fold into the underbelly.
|
Takeoff
The twin 2000 hp engines have tremendous power. Don't try to
lift off too soon, you'll want to have about 100 knots speed.
You'll need plenty of runway to get going.
After lift
off, retract the gear to build up airspeed.
Once airborne,
you'll be able to accelerate quickly.
From spot view,
you can watch the control surfaces move. |
|
|
Performance
has a tendency
to side slip at low airspeeds. Never fly a tight turn at speeds
below 400 km/h.
Although you're
faster than the enemy, he can turn much tighter. He can also
accelerate faster than you so keep your speed above 550 km/h
in combat.
Landing
Approach speed
on is about 100 knots knots with full flaps. This is a little
hot, so you'll need plenty of runway. Aim to use the full length
of the runway.
More
Information
To find out
more about the Black Widow, read a Short
History. |
|
|
