Abacus - EZ-GPS

EZ-GPS User's Guide

Page 3

from the Premier Collection

A Look at the EZ-GPS Display

As it's name suggests, EZ-GPS is designed to be easy to use. You'll quickly become familiar with it if you take two minutes to study to buttons below.

Autopilot Indicator - Lights up when the autopilot is engaged

CDI - Inicates direction of current waypoint. If the moving triangle is to the left of the center, steer left to reach the waypoint; if it's to the right of center, steer right to reach the waypoint.

Power On/Off - Activates (or deactive) the GPS

Nav Display -Shows the navigational data (see right) on the display. This data includes the current latitude, longitude, altitude, heading, airspeed and waypoint.
Navigational Display

Dest Display - Shows destination data on the display (see left). This data includes:

To current waypoint

D distance to waypoint

Nx next waypoint

Hdg current heading

Brg bearing to waypoint

ETA estimated time to waypoint

Set Button - When you purchase EZ-GPS, your registration key will unlock the flight planner which you activate by pressing the Set Button. Click here to find out about flight planning on Page 4.

Prev Dest - Press to revert to previous waypoint

Next Dest - Press to select next waypoint

Alarm On/Off - Press to activate the alarm (red light). The alarm is triggered when you are within 5 nm of the waypoint

Autopilot On/Off - Press to activate the autopilot link for "hands free" navigation

As you can see, using EZ-GPS is quite simple. If you have questions about using the Flight Planner, see the Page 4.

Revision 6204